- [Industry News]Leakage representation of sealing rubber O ring[
09/26, 2016
]
- Rubber O ring leakage representation:
Usually the gasket leak representation in four ways: interface leakage, leakage, leakage, damage soaked dispersion leakage.
Interface: the interface leak gasket compression is not enough, because the fl
- [Industry News]The body for a long time contact silicone O-ring and other silicone products will be affected?[
09/26, 2016
]
- Long time. Touch silicone silicone tube, O ring, O ring, silicone rubber products have effects on the body, so long time. Touch silicone silicone tube, O ring, rubber seals and other products to the body will have no effect, a few days ago,
- [Industry News]Compatibility of raw material and hydraulic oil (liquid) of O type sealing ring[
09/26, 2016
]
- O type sealing ring is suitable for hydraulic oil, hydraulic oil, hydraulic oil, two ester series lubricating oil, gasoline, water, silicone grease, silicone oil and other media. Nitrile rubber is currently the most widelyuse, the lowest co
- [FAQ]Rubber O ring mold in the use of the use and maintenance[
09/26, 2016
]
- The use of rubber O ring mold need to do the following:
1, avoid the bump,
In 2, a model of the time met owe good demoulding products do not use iron utensils with copper needles may avoid scratches of bamboo,
3, with the release of the mol
- [FAQ]Compatibility of raw material and hydraulic oil (liquid) of O type sealing ring[
09/26, 2016
]
- O type sealing ring is suitable for hydraulic oil, hydraulic oil, hydraulic oil, two ester series lubricating oil, gasoline, water, silicone grease, silicone oil and other media. Nitrile rubber is currently the most widelyuse, the lowest co
- [FAQ]Ordinary rubber O ring and other rubber products is how to shape?[
09/26, 2016
]
- Some people want to know the general rubber O ring is how to shape, such as O type circle, which is the mold of what material? How does it inject into the mold and then shape it? Is its material heated by rubber particles and then injected
- [FAQ]Toy belt pulley with what material to do the O type circle is better?[
09/26, 2016
]
- Before we receive an inquiry, the customer needs a small belt, with the general rubber O ring on it, but what material suitable for it
The strength and elasticity of the rubber is very good and the flexible polyurethane is very good, and it
- [FAQ]How to determine the tensile properties of O?[
09/26, 2016
]
- Tensile property is a series of tests to determine the characteristics of O type ring under the action of tensile load. It is one of the basic methods of mechanical property testing, which is mainly used to test whether the materials meet t
- [FAQ]Silicon rubber O ring of several major characteristics?[
09/26, 2016
]
- A, O ring, high and low temperature resistance, under the temperature of 200 DEG C can be used for a long time, in 60 degrees is elastic;
Two, electrical insulation properties, excellent dielectric properties of silicone rubber, especially
- [FAQ]Is there a standard specification for rubber rings in Shenzhen?[
09/26, 2016
]
- For example, our country should follow the national standard GB3452, Japanese standard JISB2401 compliance, the United States to comply with American Standard AS568 and DIN standard, some wire diameter is close to the standard in the tolera
